Roofing Calculator

Decision support

What this tool helps you decide

Best for

A fast roofing quantity estimate before a supplier conversation.

Enter

Roof length, width, pitch, waste and bundle coverage.

You get

Area and rounded field-shingle quantity.

Check before buying

Complex hips, valleys, dormers and penetrations require separate plane and accessory measurements.

What you will get

1. Needed

See the estimated project quantity from your measurements.

2. Buy

Add waste and round to complete bags, boxes, cans, bundles or delivery quantities.

3. Check

Review product coverage, site conditions, local requirements and supplier details before ordering.

Quick answer: Estimate roofing squares and asphalt shingle bundles from roof area and waste. Start with actual measurements, use the product label for coverage or yield, and treat the result as a planning estimate until site conditions and supplier requirements are confirmed.

Estimate roofing squares and standard 3-tab/asphalt shingle bundles from roof area.

Enter roof data and calculate.

Roof surface area = plan area × pitch multiplier. One roofing square equals 100 sq ft of roof surface. Bundle coverage varies by product, so use the actual manufacturer's stated coverage.

Complex roofs, valleys, hips, dormers and starter/ridge accessories can require additional material.

Practical planning notes

How to use this Roofing Calculator | Squares & Shingles

Estimate roofing squares and asphalt shingle bundles from roof area and waste. Start with the actual dimensions or load values from the project, keep the units consistent, and change the default assumptions when the product label or supplier sheet gives you a more accurate value.

What the estimate does and does not include

This page is for early material planning. The result can change with openings, layout, cuts, waste, product yield, density, packaging, access, installation method and site conditions. It does not replace structural design, permitted drawings, manufacturer instructions or a contractor quotation.

Worked planning example

For a simple project, enter one measured section first and review the result. If the shape is irregular, split it into smaller sections, calculate each section, and add the quantities before applying whole-bag, box, bundle or delivery rounding.

Before you order

  • Re-check the field measurements and the unit labels.
  • Replace generic coverage, yield, density or spacing assumptions with the exact product data.
  • Confirm package size, minimum order, delivery, tax and local requirements with the supplier.